Cost: $25
Difficulty:

Time: 15 min

RacingKing.ca subframe plates

After spending a lot of time with my E34 on the racetrack, we realised that even with thicker sway bars, the rear of the car was still showing a lot of body roll. The facts are that the subframe bushings are flexing a lot.
The addition of a delrin plate under the bushing removes a lot of the flex allowing the BMW E34 to be more responsive on the road.

• Socket set with 22mm

1- Remove the 3 bolts holding the subframe bushing plate. You don't need to jack up the car to do this.

3. Reinstall the plate and tighten the bolts. Take the car for a test drive.

(Thanks ... Me for trying new things)